You can check a USDT wallet before a transfer by three signs: the address was copied from the recipient's wallet, both sides chose the same network, and that network's block explorer shows the right address and token. After sending, check the TXID and that the USDT actually arrived. A balance screenshot or a "transfer completed" message alone does not confirm the deposit. Below is the procedure for TRC-20, ERC-20 and other networks in 2026–2027. If you are still choosing an app, compare wallets that support USDT by available networks. Before sending, check that the app itself supports the specific network. This article is for information only and is not financial advice. "Checking a USDT wallet" covers several different actions. The address shows where to send tokens. The balance shows how many tokens the explorer sees on the chosen network. The TXID lets you find an individual transaction. An AML check assesses the history of the address and incoming funds using a specialised service. These checks answer different questions and do not replace one another. For a personal non-custodial wallet, the address in the app and the address in the explorer must match. An exchange or exchange service may have a deposit address plus additional internal processing. In that case the blockchain record confirms the transfer to the specified address, but crediting to the service account is checked separately in its account area. USD₮ is issued on several blockchains. TRC-20 tokens live on TRON, ERC-20 tokens on Ethereum. The name USDT on two screens does not make the networks interchangeable. The network in the sender's form must match the one for which the recipient issued deposit details. On the recipient's side, open the "Receive" or "Deposit" screen, choose USDT and note the network shown. Then open the send screen and choose the same network. If one app says TRON and another says TRC-20, check the network description in both services: these are usually names for the same blockchain. Do not draw that conclusion from the look of the address or a similar token name alone. We covered choosing a network and making a test transfer in detail in our guide to transferring USDT between wallets. Here we check the details, the balance and the result. Copy the address with the button in the recipient's app. Paste it into the send field and compare the first and last characters with the original screen. If the pasted address differs, cancel the operation: malware sometimes replaces the clipboard. For a large transfer it is worth checking the whole address on an independent screen, not just the beginning and the end. Check that the address belongs to the chosen network. Look up a TRON address in a TRON explorer and an Ethereum address in an Ethereum explorer. Some services show an identical-looking address for several compatible networks. A similar look does not mean the recipient will automatically credit the token from any of them: the chosen deposit network decides. If the details were provided by an exchanger, check them in the current request, not in old correspondence. Deposit addresses can change. If the address only arrived in a message from "support", go back to the official website and check the request through the channel available there. We covered other signs of a reliable service in our article on checking a crypto exchanger. Open the explorer of the relevant blockchain and paste the public address into the search bar. On the address page, find the tokens section. For USDT, look at more than the symbol and amount: open the token card and compare the contract address with the one published by the issuer for that specific network. A token called USDT may have been issued by a third party. The balance in the app and in the explorer can update at different speeds. If the explorer shows an incoming token but the app does not yet, check the chosen network, data refresh and token display in the app. Do not import a contract from a random message. If the explorer does not show the transaction, first re-check the address, network and TXID; restarting the app will not fix a transfer to the wrong blockchain. Do not publish the address together with personal details unless necessary. It is fine to give the public address to the sender, but anyone can view its transactions on the open blockchain. A seed phrase or private key is never needed to view a balance. Sending, confirmation on the blockchain and crediting by the service are three different stages. While the transaction awaits confirmation, the service may not show the deposit. If confirmations are in but the internal balance is empty, keep the TXID and ticket number and contact the recipient's own support. Do not send again just because the account page updated with a delay. Example: you sent 50 USDT TRC-20 to the address the app showed for TRON. The TRON explorer shows a confirmed transaction to that address, but the exchange balance has not changed. First check the exchange's minimum deposit and its crediting history, then give the TXID to support. Checking in an Ethereum explorer adds nothing here, because the transfer went through TRON. If the network did not match before sending, stop and request new details. If the transfer is already confirmed, do not count on an automatic refund: the outcome depends on who controls the address on the chosen network and whether the service supports technical recovery. Give the recipient the TXID, network, token, address and amount through the official support channel. Never share your seed phrase with anyone. If the transfer went to the right address but a suspicious USDT is displayed, check the token contract. A similar name, icon and price in the interface do not prove the asset is genuine. Do not send an "unlock fee" to an address from a private message: network fees are shown in the wallet itself when you create an operation. Checking an address is not the same as an AML check. An explorer shows transactions, while specialised analysis can assess the address's links to known risk categories. If an exchanger asks for additional documents, first compare the request with its published rules and make sure you are communicating on its official domain. Usually not. The address shows its public history on the blockchain but does not by itself reveal the owner's identity. An exchange or other service may link the address to its client within its own system. First check the network and the address. Then make sure you are comparing the same token and that the app has refreshed its data. An exchange also has an internal balance that may change after the transaction is confirmed. No. Look up the TXID yourself in the network's explorer and check the address, amount and status. When paying a service, also check its record of the credit. No. It is not required to view a public address and transactions. A page that asks for a seed phrase to "check your balance" gains access to your funds.What exactly you need to check
Data What it confirms What it does not confirm Wallet address Payment details for the chosen network Who controls the keys and whether the service will accept the deposit Balance in the explorer Tokens at the address on a specific blockchain The owner's access to those tokens TXID A record of the sent transaction Crediting to an exchange's or card's internal balance First identify the USDT network

How to check the address before sending

How to view a USDT balance in an explorer
How to check a transfer by TXID

What to do if the check reveals an error
Questions about checking a USDT wallet
Can you tell from the address who owns the wallet?
Why does the USDT balance in the wallet differ from the explorer?
Is a screenshot with a TXID enough as proof of payment?
Do I need to enter my seed phrase on a website to check my wallet?