Severstal has supplied the first batches of high-strength steel for One Tower in Moscow City. The total volume is 8,600 tonnes of S440 rolled steel. It will be used to make load-bearing columns that reinforce the skyscraper's monolithic frame. The company announced the start of deliveries on November 2.
In a high-rise building, columns on the lower floors carry the weight of the structures above. For One Tower, the designers selected both the steel grade and the columns' cross-sectional shape. According to Gorproject chief project engineer Vyacheslav Ablovatsky, this makes the columns more compact while maintaining the required load-bearing capacity, so they occupy less space inside the tower.
Severstal estimates that S440's high yield strength can reduce metal consumption by up to 30% in individual elements. Lighter structures, in turn, reduce the load on the foundations.
The steel is produced at Severstal's Kolpino facility using two technologies. In one process, controlled rolling is used. In the other, the sheet is quenched using rolling heat and then tempered in a furnace. The method is selected according to strength and sheet flatness requirements. Every sheet is inspected at several stages of production. According to Petr Mishnev, director of the Severstal Engineering centre, the selected column section will also reduce the amount of welding required during fabrication.
Along with steel plate, the company is supplying reinforcement bars, fasteners and hardware for the tower, including stud bolts. Severstal is still preparing to manufacture completed building structures. The November 2 announcement did not specify when the completed structures would be shipped.
In April, the first concrete was poured into One Tower's foundations. By October 29, the foundation slab had been completed in the central section. According to MR, builders completed the vertical and horizontal monolithic structures on the first floor and the vertical structures on the second. Steel cores for the composite columns were installed on the third floor. The developer estimated overall project completion at 10% on that date.
MR describes One Tower as a 90-storey tower 379 metres tall. The same height is given by general designer Gorproject and architecture bureau Genpro. The tower concept was developed by Sergey Kuznetsov and the Genpro team. In summer, the project received the Moscow Architecture Award. Construction was previously scheduled for completion in 2030.
Why S440 was selected for the columns
How high construction has reached